BUG AND TAP DETECTION AND ALERT

The RF-DET range of equipment consists of RF-DET 1, 1.5 , and 2.5.

These units are high quality hand-held RF DETECTORS, each equipped with different features. All three models of RF-DET are the latest in electronic design and ergonomic styling. Reliable and easy to operate, yet incredibly effective, RF-DET are vastly superior to similar devices on the market.

RF DET- 1

RF-DET 1 is an inexpensive, but highly sensitive and reliable unit. Hand-held for ease of use, RF-DET 1, like 1.5 and 2.5, can detect all types of room transmitters, telephone transmitters and tracking transmitters.

RF-DET 1 operates silently. When the unit is functioning, a red LED will light up; when a transmitting device is detected, the entire panel of LEDs will progressively light up.

BACK

The RF-DET range of equipment consists of RF-DET 1, 1.5 , and 2.5.

These units are high quality hand-held RF DETECTORS, each equipped with different features. All three models of RF-DET are the latest in electronic design and ergonomic styling. Reliable and easy to operate, yet incredibly effective, RF-DET are vastly superior to similar devices on the market.

RF-DET 1.5

RF-DET 1.5 offers the same high sensitivity and reliability of its sister model. RF DET 1.5 shares the LED panel of RF DET 1, but additionally offers an audio feature. When a transmitter is detected by the unit, it will emit high pitched "beeps" to alert you. This indicator, which can be switched on or off, gives you a second method of locating a transmitter.

BACK

The RF-DET range of equipment consists of RF-DET 1, 1.5 , and 2.5.

These units are high quality hand-held RF DETECTORS, each equipped with different features. All three models of RF-DET are the latest in electronic design and ergonomic styling. Reliable and easy to operate, yet incredibly effective, RF-DET are vastly superior to similar devices on the market.

RF DET 2.5

RF DET 2.5 is the most advanced model in the RF DET range. Developed with an even higher sensitivity than RF DET 1 or 1.5, RF DET 2.5 is an exceptional unit and is expertly designed to perform to the highest standard.

In addition to the LED display indicator and the audible indicator of RF DET 1.5, RF DET 2.5 features the innovation of a "verify" mode. When a transmitter has been detected, to confirm this, the user is able to partly demodulate the signal which results in any transmitter present being heard through the speaker built into the RF DET 2.5. RF DET 2.5 also has additional connectors not present in RF DET 1 and 1.5. These allow you to utilize headphones for remote discreet operations, and to connect a telephone test lead direct to the telephone line to detect telephone transmitters.

BACK

The SPECTRUM 4.5 packs the performance of a professional countermeasures system into a pocket-sized device.

It is ideal for sweep operations before sensitive meetings. Beforehand, transmission can be detected and verified (with audio and visual alert) and a silent sweep can be conducted with a headphone connected. During a meeting the device can be concealed inside a pocket and operated in silent vibration alert mode.

The SPECTRUM is built to the highest specifications, is easy to operate and reliable.

Frequency coverage 10mhz to 4.5Ghz

Body-worn real time vibration alert facility

Detection and confirmation modes

Excellent sensitivity

Can be operated silently

High gain, low noise smd circuitry

Small enough to conceal in pocket

BACK

With responsibility for the security of communications within your organization you need to assess not only threats from RF transmission systems but a whole range of other information carriers. Easy to use, the DMS 2001 Multi-Detection System is the only choice for high risk areas.

The system is modular - the base unit (controller) may be operated with a series of plug-in probes. At the present time they cover RF detection, mains carrier and camera detection, infrared detection and livewire detection.

Five sweep functions in one system

Fast, effective detection

Detection of RF transmitters, telephone taps, hidden cameras, current carriers devices, infrared transmitters, laser transmitters

Fully portable for complete mobility

Simple to operate even by non-technical personnel.

5 PROBES:

- RF DETECTION

- TELEPHONE TAP DETECTION

- MAINS CARRIER DETECTION

- CAMERA DETECTION

- INFRARED DETECTION

- LIVEWIRE DETECTION

SPECIFICATIONS: MAIN UNIT

FREQUENCY RANGE: 0 Hz - 5 GHz

TUNING MODE: Automatic, locks to the strongest signal

DETECTION CAPABILITY: All transmitter types including AM, FM, sub-carrier, carrier only, single sideband, double sideband, suppressed carrier scrambled, frequency hopping and other spread spectrum types

TONE FREQUENCY: 1 KHz

VISUAL INDICATOR: 10 segment LED bar graph Indicates signal strength. The number illuminated is proportional to the signal strength.

AUDIO INDICATOR: Geiger click from internal loudspeaker or headphone

PROBES: RF Detectors IR Detectors Mains Carrier + Camera Detector Livewire Detector

CONTROLS: Five Pushbutton Switches Power on/off

Detect verify Sensitivity high/low

Probe/areal Tone generator on/off Two Rotary Controls Audio output volume, Tone volume

CONNECTORS: BNC socket 5 pin din probe socket

Charger jack socket Headphone socket

POWER SUPPLY: Internal 12V battery pack Battery charged via mains charger

ACCESSORIES: Battery charger Test transmitter Aluminum carrying case Headphones Instruction manual.

BACK